MAN V12-2000 motor za MAN D2862 LE496
Hörsching7279 km to "United States/Columbus"
Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun tvrtke s sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
- Zamjena vlastitih podataka u fakturi stvarne tvrtke
- Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
Kontakti prodavatelja
+358 50 53...
Prikaži
+358 50 5345498
+358 9 231...
Prikaži
+358 9 23165797
Austrija 
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG