Koch SBFD-35-B - BL25 stroj za formiranje ivica

Machine number: 9402/4949
Workpiece length: 140 - 2500 mm
Werkpiece width: 25 - 170 mm
Werkpiece thickness: 15 - 45 mm
Cutting station: saw motor with vertical stroke of 100 mm., motor 2,2/3,3 kW, 3000/6000rpm
Drilling station: drilling unit with pneumatic stroke of 100 mm, drilling blocks with 5 spindles, centers 25 mm
Shaping station: shaping motor with 3,7 kW, 3000 rpm, spindle 30 x 55 mm., pneumatic stroke of about 250 mm, as well as vertical adjustment
Dowelling station: 4 inserters for dowels with diameter 10 mm., dowel hopperfeed with 4 exits
Double sided machine
end-cutting
shaping
drilling and dowelinserting
as well as drilling from top and aside
Fixed side at the left
In- and outfeed heigth 990 mm
Hopperfeed at the infeed
workpiece return towards the operator underneath the machine
The workpieces are transported by dogs on a chain through the different
machining positions (cutting
shaping
drilling
dowelling). The machining of the workpieces itself is done in restposition
Equipment per side machining the ends
Glueing station with 4 glue guns
Vertical drilling
4 drilling units hanging on the top beam
movable over the machine width with adjustable position in depth
Available drilling blocks
3 pcs with 5 spindles
centers 25 mm
1 pc with 6 spindles
centers 32 and 16 mm
2 pcs with 9 spindles
centers 12 mm
Lateral drilling
3 drilling units adjustable over full width
Available drilling blocks
2 pcs with 14 spindles
centers 25 mm
1 pc with 5 spindles
centers 25 mm
2 waste removal belts