Hidraulični razvodnik za Komatsu PC30MR-2 mini bagera
Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun tvrtke s sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
- Zamjena vlastitih podataka u fakturi stvarne tvrtke
- Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
Kontakti prodavatelja
+86 189 289...
+86 189 2896 5241
Kina
Kina
Kina
Rumunjska, Seini
Rumunjska, Seini
Product Overview
The PC30MR‑2 is Komatsu's compact‑radius micro excavator — a 3‑ton machine built for the tightest work there is: digging alongside house foundations, working inside building footprints, and fitting through gateways a wheelbarrow barely clears. On a machine this small, the main control valve is the component that turns a toy into a tool. It takes the pump's limited flow and meters it with precision to boom, arm, bucket, swing and tracks, so the operator can work inches from a wall without damaging it.
On a worked PC30MR‑2, valve wear shows up as sloppiness that is hard to forgive at this scale. The boom drifts down while holding a bucket, the swing jerks and overshoots, the tracks surge when an attachment is cycled, and the machine stops tracking straight on a slope. Inside the block, worn spools and scored bores are bleeding oil across circuits. This aftermarket main valve replaces the whole assembly with fresh internals, set to the correct Komatsu pressures, so the old block comes off and the new one bolts straight back on.
Core Advantages
1. Micro‑scale precision for macro‑tight work
At 3 tons, control is everything. Lapped spools restore the fine metering that lets an operator work inches from a foundation wall without the jumpy response of a worn valve.
2. The boom stays put through an idle
Drift under a held bucket is oil escaping past worn spool lands. Fresh spool‑and‑bore pairs hold position, so the bucket does not sink while the operator checks the work.
3. Swing that does not knock the walls
Scored bores make the house jerky — overshoot, then a hunt back. New internals restore clean rotation, essential when swinging beside a building footprint.
4. Tracks that track straight again
The valve sets flow priority between travel and working circuits. New internals restore the correct order, ending the surge and the crab‑walk on slopes that a worn valve produces.
5. A complete block for a machine that earns in a day
Re‑spooling a worn micro valve on the bench is fiddly, hours‑long work. Swapping in this tested assembly is one clean exchange with the same hose positions — a day's job on a machine that earns by the hour.
Manufacturing & Quality Control
Spool and bore pairs are finished to close clearance and run‑in on the bench to confirm free movement without stick‑slip. Each completed valve is flow‑tested across its circuits, with relief and compensator settings logged before acceptance; anything off spec is stripped and reworked. The finished block is oil‑fogged, port‑plugged and shipped on compact cushioned packing.
Frequently Asked Questions
Q1: How do I confirm this fits my PC30MR‑2?
A: Send the machine serial number and a photo of the old valve's tag. Komatsu build variants across the MR‑2 run can differ, so we confirm before dispatch.
Q2: What symptoms mean the valve is worn?
A: Boom drift, jerky or overshooting swing, tracks that surge when attachments are cycled, and poor straight‑line tracking on slopes. A leak test will confirm before you commit.
Q3: Is this the same valve as the PC50 or PC60?
A: No — the PC30MR uses a smaller valve with different porting and flow rates. The sizes are not interchangeable without major plumbing changes.
Q4: Can my existing valve be repaired?
A: If the block casting is sound, a re‑spool and seal kit often restores it. Send photos and we will advise honestly on repair versus replacement cost.
Q5: Can this be shipped by express courier?
A: Yes — a compact valve this size ships well by air or express, often faster and cheaper than sea freight for a single unit. Tell us the destination and we will quote the fastest option.
Q6: What voids the warranty?
A: Materials and build defects are covered. Damage from contaminated oil, water ingress, a seized spool forced into movement or incorrect pressure adjustment is excluded. Photograph any arrival damage before uncrating.