708-1S-00253 hidraulična pumpa za Komatsu PC30MR-2 PC30UU-3 mini bagera

1. Comprehensive OEM Compatibility
This pump assembly is a direct "bolt-on" replacement engineered for the following Komatsu factory part numbers:

Primary Part Number: 708-1S-00253

Interchangeable Numbers: 708-1S-00252, 708-1S-00251

Machine Fitment: * Komatsu PC30MR-2 PC30UU-3

(Also compatible with select PC35MR-2 and PC38UU-3 series; please verify via serial number).

2. Technical Specifications & Performance
Pump Type: Variable Displacement Axial Piston Pump.

System Integration: Designed for Komatsu’s CLSS (Closed-center Load Sensing System), ensuring power is only delivered when the joysticks are engaged to maximize fuel efficiency.

Rated Pressure: Nominal operating pressure of 26.5 MPa (265 bar) to maintain original factory breakout and lifting forces.

Control Features: Integrated LS (Load Sensing) and PC (Pressure Compensation) valves. These prevent engine stalling and ensure smooth, independent control of multiple hydraulic functions.

Compact Design: Specifically engineered to fit the narrow engine compartments of Minimum Radius (MR) and Ultra-Urban (UU) machines.

3. Why Partner with a 13-Year Industry Expert?
Factory-Spec Calibration: We understand the specific flow curves required for the PC30 series. Our pumps come with regulators pre-set to factory specifications, restoring "like-new" responsiveness.

100% Bench Validation: Every unit undergoes a rigorous performance test on a hydraulic dynamometer to verify flow, pressure, and response time under full load.

Material Integrity: We provide Original New or Premium OEM-spec units that utilize hardened cylinder blocks and precision-lapped valve plates for long-term wear resistance.

Global Rapid Logistics: Units are secured in reinforced, shock-proof export crates. Delivery via DHL, FedEx, or UPS typically arrives in 3 to 7 business days.

4. Critical Installation & Maintenance Protocol
Case Priming (Mandatory): Before starting the engine, you must fill the pump housing with clean hydraulic oil through the highest case drain port. Running a piston pump "dry" will cause catastrophic failure of the internal friction surfaces within seconds.

System Flush: If the previous pump failed due to internal breakage (metal shavings in oil), you must flush the hydraulic tank, main control valve, and oil cooler. Residual debris will destroy a new pump almost immediately.

Filter & Oil Service: Always install a new high-efficiency suction strainer and return filter. Use ISO VG46 anti-wear hydraulic oil.

Air Bleeding: After installation, run the engine at low idle and cycle all cylinders (boom, arm, bucket) several times to their full stroke to purge any trapped air.

5. Ordering & Professional Support
To ensure 100% accuracy for your machine, please provide:

Machine Serial Number (found on the chassis plate).

A photo of the nameplate on your existing pump (if legible).

Are you looking for an original Komatsu unit, or would you like a quote on a high-quality replacement?