Sany 【ACHIEVE】TOP CONDITION!!! ACHIEVE 2020 SANY Stc800t6 used sany 8 autodizalica
Changsha
Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun tvrtke s sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
- Zamjena vlastitih podataka u fakturi stvarne tvrtke
- Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
Kontakti prodavatelja
+86 189 758...
Prikaži
+86 189 7589 9860
Kina 
60 m
Kina, Changsha
Rezervni dijelovi za autodizalica
Performance parameters
Maximum lifting height
78m
Maximum lifting moment
3410.4kN·m
Maximum lifting capacity
80t
Speed parameter
Maximum single rope speed of main winch
130m/min
Full extension of boom/Shorten time
125/130s
Full lifting of boom/Fall time
60/90s
Maximum giant slalom speed
1.8r/min
Weight parameters
Total weight of complete machine
50000kg
Maximum counterweight
20.2t
Dimensional parameters
Overall length of the machine
15000mm
Full width of the whole machine
2800mm
Full height of the whole machine
3880mm
Outrigger span（HorizontalxLongitudinal）
8x6.43m
Dynamic parameters
Engine model
WeichaiWP12.400E62(CountryVI)
Maximum engine power
294/1900kW/rpm
Maximum output torque of engine
2000/(1000-1400)N·m/rpm
Driving parameters
Maximum travel speed
90km/h
Minimum Turning Radius
12m
Maximum climbing gradient
0.45
Angle of approach
18°
Departure angle
14°
Minimum ground clearance
310mm
MAX. CAPACITY (Outriggers) - 80 Tonnes at 3m Radius (75% Rating) 3600 Slew
BOOM - 5 SECTION U shaped 11.8m - 45.0m
MAX. ROAD SPEED -80 km/hr
CARRIER - 8x4 Drive
MAX. ROAD SPEED - 85 km
The Sany STC800T6 is a hydraulic truck crane known for its exceptional lifting capacity and reliability. Equipped with a 6-section large cross-section U-shaped main boom that extends up to an impressive 57.6 meters and a fixed jib of 27 meters, it boasts the longest reach in the industry. Its lifting performance surpasses its competitors with an 8-meter wide lateral outrigger span and a full counterweight of 20 tons, ensuring stable and powerful lifting capabilities.
The chassis of the STC800T6 is designed for high load-carrying capacity. With a new 2.8-meter wide chassis and an enhanced rectangular frame, it provides comprehensive anti-torsion and anti-bending capabilities. Powered by a robust Weichai WP12 engine and equipped with a FAST 10-speed synchronized transmission and HanDe heavy-duty axles, the crane can easily handle slopes with a maximum climbing slope of 45%. Additionally, it achieves impressive fuel efficiency, consuming only 44 liters of fuel per 100 kilometers.
Excellent and stable chassis performance /chassis system
Double-axle drive is used, providing good traffic ability and comfortableness under complex road condition with reliable traveling performance. Engine has the multimode power output function, which reduces power consumption.
The use of tipping over early-warning technology provides high stability and safety of the overall operation.
Highly efficient, stable, energy-saving and adjustable hydraulic system
Electrical proportion Hydraulic system load feedback, piston pump, electrical controlled valve and constant power control are applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design is adopted to ensure stable braking operation.
Ultra long, super strong and highly sensitive load lifting capacity
Five-section boom of high strength steel structure and optimized U-shaped cross reduces weight significantly with higher safety rates Jib mounting angles are 0°, 15°and 30° which ensures fast and convenient change-over between different operating conditions so as to improving working efficiency of the machine.
Safe, stable, advanced and intelligent electric control system
Self-developed controller SYMC specially for engineering machinery is configured.
The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness and high reliability.
Timely feedback of data information can achieve the monitoring of the overall working status in real-time.
The load moment limiter equipped with the comprehensive intelligent protection system is used with accuracy within 3% to provide a omprehensive logic and interlock control, thus ensuring more safe and reliable operation.